Making a coffee table using a bicycle wheel

Two non-impact bicycle rims (mine 26 inches) are nested at half distance between each other with
 equal rim holes provided. (The inner rim flexes into the elliptical rim).

 We fix the rims with 2 thin screws and nuts to the rim holes. The bottom of the rim to the bottom of the sibop hole fixing the foot of the table with screws and nuts are appropriate. I did this screw on the bike with the rear wheel hub screw and nuts.

 I extended the sibop entry hole a little because the rear rear bumper is wide. If it is a thin screw, I cut it off the fine suntops.


 I used an old wardrobe base as a coffee table mat. I cut the tongs. I used an old handlebar neck to keep the bike tongs from playing. I cut it to the tongs I cut (I cut off the place of the handlebars of the handlebars).